USDUSD
EUREUR
GBPGBP
CADCAD
AUDAUD
NZDNZD
Supastands Tomcat 1/48 acrylic display stand view front left@2x
Supastands Tomcat 1/48 acrylic display stand view front left cradle 2
Supastands Tomcat 1/48 acrylic display stand view front left
Supastands Tomcat 1/48 acrylic display stand view front right
Supastands Tomcat 1/48 acrylic display stand view rear right
Supastands Tomcat 1/48 acrylic display stand view rear right
Supastands Tomcat 1/48 acrylic display stand closeup main cradle
Supastands Tomcat 1/48 acrylic display stand closeup main cradle
Supastands Tomcat 1/48 acrylic display stand mounting model view rear
Supastands Tomcat 1/48 acrylic display stand mounting model view rear 2
Supastands Tomcat 1/48 acrylic display stand mounting model view front
Supastands Tomcat 1/48 acrylic display stand packaging front
Supastands Tomcat 1/48 acrylic display stand packaging contents
Supastands Tomcat 1/48 acrylic display stand packaging rear
Supastands Tomcat 1/48 acrylic display stand with model view three
Supastands Tomcat 1/48 acrylic display stand with model view two
Supastands Tomcat 1/48 acrylic display stand with model view four
Supastands Tomcat 1/48 acrylic display stand with model view one
Supastands Tomcat 1/48 acrylic display stand with model view five
Supastands Tomcat 1/48 acrylic display stand view front left@2x
Supastands Tomcat 1/48 acrylic display stand view front left cradle 2
Supastands Tomcat 1/48 acrylic display stand view front left
Supastands Tomcat 1/48 acrylic display stand view front right
Supastands Tomcat 1/48 acrylic display stand view rear right
Supastands Tomcat 1/48 acrylic display stand view rear right
Supastands Tomcat 1/48 acrylic display stand closeup main cradle
Supastands Tomcat 1/48 acrylic display stand closeup main cradle
Supastands Tomcat 1/48 acrylic display stand mounting model view rear
Supastands Tomcat 1/48 acrylic display stand mounting model view rear 2
Supastands Tomcat 1/48 acrylic display stand mounting model view front
Supastands Tomcat 1/48 acrylic display stand packaging front
Supastands Tomcat 1/48 acrylic display stand packaging contents
Supastands Tomcat 1/48 acrylic display stand packaging rear
Supastands Tomcat 1/48 acrylic display stand with model view three
Supastands Tomcat 1/48 acrylic display stand with model view two
Supastands Tomcat 1/48 acrylic display stand with model view four
Supastands Tomcat 1/48 acrylic display stand with model view one
Supastands Tomcat 1/48 acrylic display stand with model view five

Tomcat 1/48 – F-14 Tomcat display stand

Display any 1:48 F-14 Tomcat in flight with a sleek clear acrylic stand designed for finished models. Includes multiple cradles for level flight or banking left and right.

$24,95

✔ No drilling
✔ No glue or magnets
✔ Easy assembly
✔ Ships to EU/UK/North America/AU/NZ

Product details

Show your F-14 Tomcat in flight.

The Supastands Tomcat is a sleek clear acrylic display stand made specifically for all 1/48 scale F-14 Tomcat models. Designed for finished builds, it lets you present your aircraft in realistic flight attitudes while keeping the focus on the model itself.

Choose from level flight, hard banking left, or hard banking right using the three included cradle options. You can place kits while still building them or after they’re completed. The stand does not interfere with any external stores or landing gear, so it will fit any F-14 in your collection.

This stand is designed for all 1/48 Tomcat kits of all models: F-14A, A+, B and D, from all manufacturers (AMK, GWH, Tamiya, Hasegawa, Hobby Boss, Trumpeter, Revell, Monogram, etc.). You do not need to modify your model in any way (no drilling, no additions). Simply rest your model into the cradle system and let gravity do the rest. You can easily remove your Tomcat for transport, or swap it for another 1/48 F-14 kit.

Weight 205 g
Dimensions 16 × 23 × 1 cm
Scale

1/48
Aircraft

F-14 Tomcat
Suited for

AMK, GWH, Tamiya, Hasegawa, Academy, Hobby Boss, Eduard, Revell, Monogram, Italeri, AMT and more

Gallery

FAQ

  • Do I need to modify my model to use a Supastand?

    No. Never. No drilling. No magnets. No glue. No screws. Supastands are designed to support your finished model using gravity and geometry only. Your aircraft rests securely in the cradle. Gravity will do the rest.

  • Will Supastands work with a fully built and painted model?

    Yes. Supastands are made for finished models, including:

    • Full weapon loadouts
    • External fuel tanks
    • Weathering
    • Decals
    • Clear coats

    You can mount your model immediately, without any prior preparation.

  • How does the model stay in place?

    The stand uses a carefully designed cradle and (depending on model) an exhaust latch system.

    You slide the exhaust section into position and rest the fuselage in the cradle. The aircraft’s own weight stabilises it.

    No tension. No pressure. No damage.

  • What material are Supastands made from?

    Every Supastand is made from laser-cut clear acrylic.

    Each part is covered in scratch-resistant protective film on both sides. Just remove the film before assembly.

  • Is assembly difficult?

    Assembly steps are simple:

    1. Remove protective film.

    2. Gently push the pillar pins into the base notches.

    3. Slide the cradle into the pillar.

    4. Place your model.

    Supastands fit without requiring any glue, but you can always add a drop of glue if that makes you feel safer 🙂

  • Do I need glue to assemble the stand?

    No glue required.

    The stand uses precision-fit laser-cut joints. Everything slides and locks into place securely.

    However, you are always welcome to add a drop of glue if that makes you feel safer 🙂

  • Can I disassemble the stand later?

    Yes.

    Because there’s no glue involved, you can take it apart for storage or transport.

  • Will the stand fit every brand of kit?

    Supastands are designed to accommodate standard kit geometry within each aircraft type and scale. Because manufacturers vary slightly, the cradle system allows positioning flexibility to achieve proper balance.

  • Can I use the stand for a different aircraft?

    Although each stand is designed for specific aircraft types, there are usually possibilities to fit other types too. A range of replacement cradles are planned. Modellers are also encouraged to use their own creativity to modify the stands to fit other aircraft types.

  • Why are Supastands made from clear acrylic?

    Our design philosophy is that the stand stand should disappear. Clear acrylic creates a sleek, unobtrusive in-flight display. Your aircraft is the art. The stand simply elevates it.

  • Where are Supastands made?

    Supastands are designed, developed and produced in The Netherlands. Supastands are an EU product.

  • Won't Supastands damage my finish?

    With normal use and care, Supastands will not damage your model. Take care to let the top coat on your model fully cure before placing it on the stand.

    Some modellers choose to add extra protection (for example felt or small rubber nubs) in order to further protect their model, but it is not necessary.

  • Will you ship to the US?

    Yes, we will. Small letterbox orders currently go through without any problems. There is, however, no telling if that may change in the future.

  • Will you ship to the UK?

    Yes, we will. Small to medium orders go through without any problems.