USDUSD
EUREUR
GBPGBP
CADCAD
AUDAUD
NZDNZD
Supastands Phantom 1/48 acrylic display stand view front left (x2 resolution)
Supastands Phantom 1/48 acrylic display stand view front right
Supastands Phantom 1/48 acrylic display stand view side left
Supastands Phantom 1/48 acrylic display stand closeup main cradle
Supastands Phantom 1/48 acrylic display stand closeup cradle attachment one
Supastands Phantom 1/48 acrylic display stand closeup cradle attachment two
Supastands Phantom 1/48 acrylic display stand mounting model view rear
Supastands Phantom 1/48 acrylic display stand mounting model view side
Supastands Phantom 1/48 acrylic display stand with model (view two)
Supastands Phantom 1/48 acrylic display stand with model view one
Supastands Phantom 1/48 acrylic display stand with model view three
Supastands Phantom 1/48 acrylic display stand packaging front
Supastands Phantom 1/48 acrylic display stand packaging back
Supastands Phantom 1/48 acrylic display stand packaging contents
Supastands Phantom 1/48 acrylic display stand view front left (x2 resolution)
Supastands Phantom 1/48 acrylic display stand view front right
Supastands Phantom 1/48 acrylic display stand view side left
Supastands Phantom 1/48 acrylic display stand closeup main cradle
Supastands Phantom 1/48 acrylic display stand closeup cradle attachment one
Supastands Phantom 1/48 acrylic display stand closeup cradle attachment two
Supastands Phantom 1/48 acrylic display stand mounting model view rear
Supastands Phantom 1/48 acrylic display stand mounting model view side
Supastands Phantom 1/48 acrylic display stand with model (view two)
Supastands Phantom 1/48 acrylic display stand with model view one
Supastands Phantom 1/48 acrylic display stand with model view three
Supastands Phantom 1/48 acrylic display stand packaging front
Supastands Phantom 1/48 acrylic display stand packaging back
Supastands Phantom 1/48 acrylic display stand packaging contents

Phantom 1/48 – F-4 Phantom II display stand

Clear acrylic display stand designed for J79-powered 1:48 F-4 Phantom II models, using a dual-cradle and exhaust support system for stable in-flight display.

$24,95

✔ No drilling
✔ No glue or magnets
✔ Easy assembly
✔ Ships to EU/UK/North America/AU/NZ

Product details

The Supastands Phantom stand is engineered specifically for the US/international version of the F-4 Phantom II, powered by J79 engines. The multi-cradle setup grips the exhaust and supports the underside fuselage for a stable, natural flying angle.

This stand was created using real kit fitting data and works with Revell, Italeri, Tamiya, Zoukei-Mura, Academy, Hasegawa, Monogram and all other brands of F-4 Phantom models. It is NOT compatible with the UK series of Phantoms.

No drilling. No rods. No underbelly holes. Just place the completed model on the stand and enjoy a realistic flight pose.

Weight 205 g
Dimensions 16 × 23 × 1 cm
Scale

1/48
Aircraft

F-4 Phantom II

FAQ

  • Do I need to modify my model to use a Supastand?

    No. Never. No drilling. No magnets. No glue. No screws. Supastands are designed to support your finished model using gravity and geometry only. Your aircraft rests securely in the cradle. Gravity will do the rest.

  • Will Supastands work with a fully built and painted model?

    Yes. Supastands are made for finished models, including:

    • Full weapon loadouts
    • External fuel tanks
    • Weathering
    • Decals
    • Clear coats

    You can mount your model immediately, without any prior preparation.

  • How does the model stay in place?

    The stand uses a carefully designed cradle and (depending on model) an exhaust latch system.

    You slide the exhaust section into position and rest the fuselage in the cradle. The aircraft’s own weight stabilises it.

    No tension. No pressure. No damage.

  • What material are Supastands made from?

    Every Supastand is made from laser-cut clear acrylic.

    Each part is covered in scratch-resistant protective film on both sides. Just remove the film before assembly.

  • Is assembly difficult?

    Assembly steps are simple:

    1. Remove protective film.

    2. Gently push the pillar pins into the base notches.

    3. Slide the cradle into the pillar.

    4. Place your model.

    Supastands fit without requiring any glue, but you can always add a drop of glue if that makes you feel safer 🙂

  • Do I need glue to assemble the stand?

    No glue required.

    The stand uses precision-fit laser-cut joints. Everything slides and locks into place securely.

    However, you are always welcome to add a drop of glue if that makes you feel safer 🙂

  • Can I disassemble the stand later?

    Yes.

    Because there’s no glue involved, you can take it apart for storage or transport.

  • Will the stand fit every brand of kit?

    Supastands are designed to accommodate standard kit geometry within each aircraft type and scale. Because manufacturers vary slightly, the cradle system allows positioning flexibility to achieve proper balance.

  • Can I use the stand for a different aircraft?

    Although each stand is designed for specific aircraft types, there are usually possibilities to fit other types too. A range of replacement cradles are planned. Modellers are also encouraged to use their own creativity to modify the stands to fit other aircraft types.

  • Why are Supastands made from clear acrylic?

    Our design philosophy is that the stand stand should disappear. Clear acrylic creates a sleek, unobtrusive in-flight display. Your aircraft is the art. The stand simply elevates it.

  • Where are Supastands made?

    Supastands are designed, developed and produced in The Netherlands. Supastands are an EU product.

  • Won't Supastands damage my finish?

    With normal use and care, Supastands will not damage your model. Take care to let the top coat on your model fully cure before placing it on the stand.

    Some modellers choose to add extra protection (for example felt or small rubber nubs) in order to further protect their model, but it is not necessary.

  • Will you ship to the US?

    Yes, we will. Small letterbox orders currently go through without any problems. There is, however, no telling if that may change in the future.

  • Will you ship to the UK?

    Yes, we will. Small to medium orders go through without any problems.